Transmission

At what speed do you want to switch gear to the Honda Accord VII?

At what speed do you want to switch gear to the Honda Accord VII?
The recommended speeds for the switch of Honda Akcord 7: 1) For engine 2.0 L:-C 1 for 2-25 km/h.-From 2 to 40 km/h.-From 4th to 5-80 km/h.Maximum speeds for transfers:-1-I-54 km/h.-2-I-100 km/h.-4-I-183 km/h.

No ex post on the six-stage Honda Accord VII

No ex post on the six-stage Honda Accord VII
The six-speed motor box on the chord 7 is equipped with a special electronic lock, which prevents switchgear shifting from the fifth gear to the reverse gear instead of the sixth gear.

Brake clicked in "parking" mode on Mazda 3 (I)

This kind of malfunction occurs quite often, it's easy to solve. The first thing you need to do is open the arm-pot, pull up the cup holder. After that, you need to remove the square plastic border of the checkpoint, going up and pulling it up

Special considerations of the Honda Accord VII regime

Special considerations of the Honda Accord VII regime
Automatic box Honda Akord 7, in addition to the traditional P (parking), D (movement), R (reverse) and N (neutral) modes, has two other special modes:-M-mode of manual gearshift

Problems with gearboxes on Honda Accord VII

Problems with gearboxes on Honda Accord VII
The elements of the Honda Akcord 7 transmission are sufficiently reliable. The main problems are usually associated with the clutch. It is necessary to change it most often at a distance of 120-150 thousand tons. km Also after 70 to 90 thousand

Removal and installation of the gearbox at Mazda 3 (I)

Removal and installation of the gearbox at Mazda 3 (I)
To remove the gearbox at Mazda 3 (I) it is necessary to remove the PAC, its tray and the retaining arm of the tray. Then remove the air filter element. Unmount the dashboard, unlocking the seven bolts, two screws, and three pitons

Adjustments of adhesion on Honda Accord VII

Adjustments of adhesion on Honda Accord VII
To adjust the clutch of the Honda Accord 7, we do the following: 1) Meria the height of the floor. It's supposed to be 187 m.2. It shall be 130 to 140 mm. 10-18 mm. 3) If necessary, control the height of the pedal

Replacement of ACPR liquid at Honda Accord VIII

Replacement of ACPR liquid at Honda Accord VIII
To change the liquid in the automatic box of Honda Akcord 8, we need to do the following: (1) Take 4 liters of ATF liquid (ATF Z1.2).

Withdrawal and installation of PPC PPC to Mazda 3 (I)

Withdrawal and installation of PPC PPC to Mazda 3 (I)
To remove the PPC pass on Mazda 3 (I) it is necessary to remove the chomut from the wheel with the help of pliers. Then mark the body of the jot and shaft for the convenience of the assembly.

Honda Civil 8

Honda Civil 8
For parking on the Honda Civil 8: with the engine switched on, switch the ACPR position to the "R" position (reversing) to the point where the engine is clicked, and then turn off the engine. Attention: It is not recommended to park the car on transmission if the robot fails