- Details
-
June 08, 2022
-
Written by Jason Hance
Peugeot's owners are often diagnosed with error P0006. At the same time, ACPR often goes into emergency mode. This is an engineering defect in hydraulics to operate an AL-4 automatic gearbox
- Details
-
June 05, 2022
-
Written by Jason Hance
The initialization refers to the "training" of the executive clutch mechanism of 2-Tronic on Peugeot 207, which once again forces the box to "feel" the extreme positions, taking into account the wear of the clutch, or after resetting the settings that occurred for some reason
- Details
-
June 01, 2022
-
Written by Jason Hance
If there are no errors on the Peugeot 207 display associated with the work of the RSCs, the clutch of the clutch shall be reduced by the wear and tear of the chaining;-Rear gear is reduced;-Reversing vibration:-vibration at the beginning of the movement
- Details
-
May 28, 2022
-
Written by Jason Hance
The life of the Peugeot 207 traction control depends largely on the operating conditions of the car. According to the owners ' feedback, it averages around 30,000 to 40,000 km, although there are many cases where the need for replacement arose early in the period
- Details
-
May 25, 2022
-
Written by Jason Hance
In the Peugeot 207 manual with robotic box 2-Tronic, it is stated that the vehicle is prohibited from being held on the ground by pressing the pedal of the gas: this leads to an increased load on the clutch, its accelerated wear and may lead to a breakup of the RPCR
- Details
-
May 21, 2022
-
Written by Jason Hance
The Peugeot 207 with box 2-Tronic or with ACPR must be translated with the selector of ACPR or the RCCI in the "N" position. For automatic gearbox transfers large distances are undesirable due to heavy load and low friction lubrication
- Details
-
May 18, 2022
-
Written by Jason Hance
Peugeot 207 in traffic jams often goes into emergency mode. We have to stop and stop the engine. After a few minutes of waiting, it starts working normally and then starts again
- Details
-
May 14, 2022
-
Written by Jason Hance
PPC 2-Tronic and the shift to emergency mode are often caused by a low battery charge. But if the KB is excluded, computer diagnostics are required in a specialized service center
- Details
-
May 11, 2022
-
Written by Jason Hance
In the absence of other symptoms, the metal knock at 2-Tronic Peugeot 207 can be explained by the design features of the gearbox faced by Peugeot 207 owners both with the RSC and the MCP
- Details
-
May 07, 2022
-
Written by Jason Hance
The presence of error P1804 ("Gearbox fault") indicates a thermal protection of the clutch engaged. Peugeot 207 with box 2-Tronic is quite common. It may be caused by a malfunction of the RFC, and it may be caused by the vehicle's operating conditions