In order to remove the creak of the clutch of the VAZ-2110/11/12, it is necessary to partially disassemble the clutch, but specifically:

-On the clutch of the clutch, slide the rubber washer and pull the pin out of the hole.

" There are two nuts and bolts of a rope-stick together with the fork of the clutch, you need to wipe the clutch plug, and all the connecting parts to lubricate the graphite grease.

" Then it is necessary to collect everything in reverse sequence, with a rubber puck attached to the plug, and the beadle by 180 degrees against the position where it was standing until the clutch disassembly.

-The chaining of the clutch is to lubricate the engine oil in several places (from the fork of the clutch, in the place of the rope in the shell).

After this sequence of actions, the squeaking of the clutch pedal shall disappear.




Add comment

Security code
Refresh