- Details
-
January 13, 2023
-
Written by Jason Hance
Check the height and the free travel of the brake pedal, Lifan Smiley in this order: Depth the brake engine and press the pedal repeatedly to remove vacuum amplifier.
- Details
-
January 12, 2023
-
Written by Jason Hance
The seat of the driver and the front passenger on Jill's MK is removed in the same way. The removal procedure is as follows: Remove the head restraint and slide the seat back to the focus. View the two rack-mounting bolts and unscrew them
- Details
-
January 11, 2023
-
Written by Jason Hance
To select the folders from which the music will be played in the Magnesium Magnesium MK, we do the following: Click on the right regulator of the magnets and enter the TRK SCH/FILE SCH/SJAR SCH/MP3001 file search menu. Selecting the FILE SCH function-it should display on the display
- Details
-
January 11, 2023
-
Written by Jason Hance
To remove the rear seat on Lifan Smiley, do the following: The key to the 10 is the forward two bolts of the seat cushion to the back of the body
- Details
-
January 11, 2023
-
Written by Jason Hance
The first generation of the first generation of Jill MK was not placed, and was not even offered
- Details
-
January 10, 2023
-
Written by Jason Hance
The most common problem of AD MK's bad air conditioner is the failure of the fuse or the fan or compressor relays
- Details
-
January 10, 2023
-
Written by Jason Hance
If Lifan Smiley began to crack the oven ventilator, it most likely hit him with some garbage or leaves. To fix the problem we do the following: Drop the glove box and remove it from the left and right.
- Details
-
January 09, 2023
-
Written by Jason Hance
In order to check and adjust the clutch pedal to Jill MK, we do the following: 1. We lift the floor mat 2. Checking the height of the pedal position. It must be 134 ,3 ... 144.3mm
- Details
-
January 09, 2023
-
Written by Jason Hance
If the wheels of a wheel are not completely terminated by a wheel or, conversely, the brakes are not very effective, it is necessary first of all to verify that the brake pedal is correctly installed. First measure the distance (A) from the end of the vacuum side to the hole in the pushers plug
- Details
-
January 08, 2023
-
Written by Jason Hance
In order to install a 2-din device on Lifan Smiley, instead of a regular magnet, it is necessary to buy the audio system itself and a transition frame for it. If you want to paint a frame under the color of the salon, it is an aerosol paint.