Vehicle interior

The brake pedal adjustment procedure on Lifan Solano is as follows: Picking up the driver's floor mat. It must be 136 to 146 mm

To remove the bottom cover of the dashboard on the Honda Civil 8, it is necessary to install the steering column in the upper position. Release the bottom cover of the control panel from the retainers by gently pulling the lower edge of the control panel.

To remove the heater hose assembly at Honda Civil 8: Liquid engine coolant. Then remove the air purifier enclosure. Next, remove the heater hose by reconnecting it from the clamps, the coolant hose, and the heater hose

To remove the front seat on Lian Solano, do the following: Remove the lower cover of the seat sled (5), unlocking the bolt (4)

To install a nylon on the Honda Civil 8 to remove the back of the lining by unlocking the latches using a screwdriver. Remove the old base from the two securing screws. Then set the base of the armrest and the armrest itself, by solvating it on the mores

To replace the front seat ramps on the Honda Civil 8: Unmount the front seat. Then remove the front upholst/upholstery and upholstery of the front seat/soft lining

To remove the handlebar on Lifan Solano, do the following: Disconnect the cable from the battery. Put the wheel in a straight line. Using a key or a screwdriver, loosen the two bolts on the steering wheel

To replace the rear-view mirror on the Honda Civil 8: Release the two mirror attachment hooks, then pull the mirror downwards for the bottom of the mirror. Pull the back attachment hook down to release it from the holder and move the mirror back to its base

The third generation CR-V air conditioner can be independently switched off at high ambient temperature. The reason for this behavior is the increase in the gap between the pulp and the coupling of the air conditioner

To remove the back seat back on Lifan Solano, you will need 8 and 10 heads. Order of work: Attach the left side of the back and trim the upholstery.