Vehicle interior

The first thing to do is disconnect the battery, remove it and the ground, disconnect the brake system from the main brake cylinder.

The Hyundai Accent is not designed specifically for the Hyundai Accent, but it is possible to purchase German parts VAG. Part numbers for order: 1-3C08645219B9; 2-8E0864 227; 3-8E08642299B9; 4-3C08645239B9. Correspondingly, four pieces of each piece are needed to secure one mat

From 2007 onwards, there were head restraints for seated passengers in the MT-3 and AT-5. However, it is possible to install the head restraints and the Hyundai Accent in another pick or earlier year of the release

To install the Intro CHR-4633 MZ3 on Mazda 3, you first need to disconnect the air duct panel, then turn off the two retaining screws

Evaporator does not block the inclusion of an air conditioner if its temperature is 3.0 +-0.6 degrees. and above; the evaporator does not allow or disable the air conditioner if its temperature is 1.5 +-0.6 degrees and below. I see.

First, it is necessary to remove the black plastic frame of the dashboard, which is held on the metal groans. To do that, you need to pull the lower edge of the bottom. Now, we need to roll four of the mores that keep the dashboard. You can then remove the view

It is often the creak of a seat belt ripping behind the seat creak. The castle is secured by a nut with a rifled Cheya. It is this puck that is the cause of the violins. It needs to be lubricating graphite or silicone grease

Hyundai Accent, while moving at high speed for a long period of time, is significantly heating up the central tunnel-from the shelf under the "torpedo" to the shelf under the lever of the handbrake. This is due to the location of the exhaust system

Vibration of the clutch usually associated with the vibrations of the engine running. The clutch pedal is actually directly related to the transmission, and the transmission has a hard link to the engine

The first thing you need to do is disconnect the minus cell phone.