- Details
-
December 06, 2022
-
Written by Jason Hance
This is a feature of all the Korean cars assembled for the American market. The fact is that the constant indication of the fuel level and the mileage even when ignition is turned off is a mandatory condition for insurance companies in America
- Details
-
December 05, 2022
-
Written by Jason Hance
There are several options for solving the problem. They all mean dismantling the dashboard. First, it is possible to handle the grease plastic end of the speedometer. One can handle the cable connector.
- Details
-
December 04, 2022
-
Written by Jason Hance
Before you start, you need to disconnect the minus cell phone.
- Details
-
December 04, 2022
-
Written by Jason Hance
The corners of the rear-view mirrors will need to be removed if the front doors are to be removed. First, you need to unclamp the top latch in the upper corner of the triangle. You need to do it with a facial screwdriver.
- Details
-
December 03, 2022
-
Written by Jason Hance
If you are not satisfied with the standard light in the boot of Getz (the small fon on the left with a lamp of 5 W), you can put a 10-W lamp, but it is unlikely to solve the problem. Additional LED light can be made
- Details
-
December 03, 2022
-
Written by Jason Hance
Before you start, you need to disconnect the battery from the battery
- Details
-
December 03, 2022
-
Written by Jason Hance
Generally, noise is caused by garbage, which touches the fan of the fan. To get to the fan, remove the glove compartment. The fan is secured by three smores. They are curled with a pretty big effort, so it's better to use a big screwdriver
- Details
-
December 02, 2022
-
Written by Jason Hance
Many owners are irritating to the creak of regular rubber pedals on the sole of their shoes. It's easy to get rid of the linings of pedals. The wrinkles will come from Hyundai Coupe. The brake and clutch pedal shall be easily replaced without removing the pedal. Gas pedal needs to be removed
- Details
-
December 01, 2022
-
Written by Jason Hance
To replace the salon filter, you need to open the glove box, push it on its side, and push the bar fully forward. Then we need to pull the retainer roulette, press the retainer to release the retainer. Then, locate the cover of the salon filter cover
- Details
-
December 01, 2022
-
Written by Jason Hance
By default, if the top temperature of the window is turned on, the air conditioner is automatically turned on when the air is switched on. In order for the air conditioner to not turn on automatically, you must press the Front button and then press the A/C button three times. The function will be disabled