Replacement of shock absorbers on Toyota Avensis 2

Procedure for replacement of the front shock absorbers on Toyota Avensis 2: Pull up the wheel and pull the stabilizer nut on the rack cabinet to the front of the rack. Finger of the hinge pin while holding the key "on 6." We unplug the rack cabinet by unlocking the rack-mounted version of the rack sensor to the top of the rack cabinet.

1. Lift the car and take the wheel off.
2. Scrolls the stabilizer nut on the stabilizer to the rack. The finger of the hinge holding the key "on 6".
3. Unwind the bolt and disconnect the brake hose from the rack.
4. Disconnect the ABS sensor.
5. Scrolls the 2 screws at the rack cabinet to the swivel.
6. Scrolls the top 3 nuts of the top rack cabinet under the hood.
7. We're taking the stand.
8. With the stitches, we squeeze the spring.
9. Scrolling the top nut of the anchorage by locking the saddle springs.
10. We're taking the stand and we get the shock absorber.
11. We put in a new shock absorber and set it in the opposite direction.

Add comment