To tune the ACPT cable to the Chevrolet Cappativa, do the following:
(1) Put the lever in position N.
2) Disconnect the cable from the gearshift lever.
3) Disconnect the cable from the cable-management arm.
4) release the cable lock.
5) shift the black projection back.
6) Insert a screwdriver under the white projection, pull the white projection up.
7) Insert a cable into the cable-management arm and record it with a new cable arm. When you install, you will be given a click.
(8) Put the lever in position N.
(9) A cable shroud on the lever of the lever.
(10) Fixed the leveling of the cable and pressing the white projection.
(11) A black projection is made on a white and fixed projection, after which the switch shall be checked.