There are springs from different cars in the Hover, it is necessary to choose the most advantageous option.
The characteristics of the spring are:
- It's a 13 mm diameter bar.
- Diameter is internal 100-104 mm.
- The outer diameter is 130 mm.
- Height without 390 mm load.
- Number of Bickets 6.
The following springs are suitable:
FOCUS (VAZ 2120 Hope)
- Length: 433 mm.
- Thickness of spring: 14.9 mm.
- Number of full turns: 9.6
- The quality of springs is average, and they are eating out over time. Requires that shock absorbers be replaced with shorter shock absorbers.
SIRIUS
- It's a diameter of 15 mm.
- The length is in the free state of 434 mm.
- Requires replacement of shock absorbers.
KILEN
- 5702 L=364 mm dp=16 mm
- 5703 L=365 mm dp=15.5 mm
- 5707 L=413 mm dp=12.7 mm (Terrano I (WD21) is optimal without modification) The hard-to-original, which slightly increases the clearance (about 20 mm) and the rear of the car starts to jump at roughness. The shock absorbers may not be changed.
Kayaba
- R5305 L=419 mm dp=13.7 mm (Terrano II)
- R5306 L=401 mm dp=14.98 mm (Heavy Duty)
- RD5081 L=362 mm dp=16.4
Lesjofors (Sweden)
- Number 4227564 dp = 13.25 mm d = 417 mm Type of spring: CC
- Number 4240000 dp = 13.25 mm d = 415 mm Type of spring: CC
- Number 4263439 dp = 13.50 mm d = 407 mm Type of spring: CC
- Number 4263448 dp = 13.25 mm d = 415 mm Type of spring: CC
- Number 4263449 dp = 13.75 mm d = 426 mm
- Number 4263450 dp = 13.50 mm d = 417 mm Type of spring: CC