Replace the front shock absorbers on the Audi A4 B7

The procedure for the removal of the Bonus Depreciation on the A4 A4 generation: Remove the wheel. Install the brake disc with one bolt. If there is an automatic correction lamp, we disconnect the vehicle-level sensor thrust from the supporting lever. Disconnect the ABS from the anchorage on the sub-port. Let' s take off the brake line. Let' s take off the superport. We pull the screw up. We're going to release the two levers. Let' s move the back of the shock absorbers to the back of the lever. Let' s release the screws at the top of the shock absorber. Let' s remove the three bolts. Let' s remove the three screws. Caution the rack.

1. We're rolling the wheel.
2. Lock the brake disc with one bolt.
3. If there is an automatic headlamp, disconnect the drive-level sensor from the bearing lever.
4. Disconnect the ABS from the attachment line on the sub-port.
5. Remove the brake line.
6. We're taking the superport off and putting it on the back of the road.
7. It's a bind.
8. Unscrew the bolt and pull the two levers up.
9. We provide support for the reverse of the shock absorbers.
10. Scrolls the retaining screw to the lever.
11. Releasing access to the retaining screws on the shock absorber.
12. I'm going to get three bolts.
13. Gently off the rack.