Any wheel disks lose their old moose over time. The reason is the aggressive environment in which they have to live, as well as various mechanical injuries. Like a turnip stench in the parking lot. Lite and wrought discs appear as if the steel disks can start to rust.
It is possible to solve cosmetic damage of wheel discs with their hands, but the work is long and difficult. The more complex the disk form-the more difficult it will be to process it and paint it neatly.
You will need to do the following:
1. Grain-sized paper with various sizes
2. Skin on drill
3. A pair of acrylic soil cylinders for discs
4. 4 colours
5. Luck for outdoor work
6. Pair of painting (paper) tape
Disk discoloring process:
1. Remove the wheel and thoroughly rid the disc of old paint and primer-paper. It is important to give this process maximum attention, because all shortcomings at this stage will have a negative impact on the end result.
2. If the rubber is not removed from the disc, it is necessary to clad the rubber with the rubber of the paint. We also need to tape the nipple. If the rubber is cut, you don't have to stick it in.
3. Apply first layer of soil, wait 20 minutes, apply second layer of soil, wait an hour.
4. After the ground is dry, paint the first layer of paint. After the first layer of paint is dry, make the second layer and give the disks a night.
5. Apply a layer of varnish, wait for half an hour and deliver a second layer of varnish.
Accuracy and patience in painting the disks will lead to a good result.
