Engine

To remove the EP6 cooling system pump on Citroen C4, it is necessary to install the car on the 2-rack lift. Disconnect the CCM and drain the liquid from the cooling system

Fuel consumption of VAZ-2105i cars (with injection engine) due to the ECU configuration has decreased compared to carbureties

In order to remove the GRM belt from a Citroen C4 with a petrol engine of 1.6 l, it is necessary to lift and dock the car so that the front wheels do not touch the floor.

To replace the vehicle Citroen C4 with engine EP6, it will be necessary: a dynamometer with a torque of 23 Nm, an extension of not less than 15 cm, a fresh 12-sided key "for 14" (code FORCE 5497714, Beru SW 14 Bi-Hex, Hazet 4766-2, FORCE 807314M).

The causes of the unpleasant smell of smoke from the VAZ-2110 silencer may be several

The solution to the problem of derelation of the butter hole when replacing the oil on Citroen C4 can be complete substitution of the pan (radical solution). It is either in the old pallet that the drain hole is located under the larger diameter, cut the threads, and obtain a large diameter cork

To replace the oil in the Citroen C4 engine, you need to drive the car over to the pit. Remove the air reflector, protect the crankcase, and unscrew the filler.

If the onboard computer doesn't produce any error, then it's not about the sensors; you need to check the throttle pedal in the first place. Maybe he's just a stickler, and the locksmith doesn't keep up.

If the valve lid of the Citroen C4 car gave a leak, it is most likely the case in its gasket, which has evolved over time and has lost its leakproofness

To replace the air filter with the Citroen C4 car, you need to open the hood and find the air filter.