Engine

In most of the models, the generator is the same, so the procedure for disasseming and replacing the generator at "classic" (VAZ 2105, 2106 and 2107), "Samara" (2108, 2109 and 21099), "tenth" family (2110, 2111 and 2112) and "new Samara" (2113, 2114 and 2115) are almost identical

The need to replace the GRM chain may be an indication of the crash when the engine starts, the engine is warm, and the speed of the movement at low speeds can be seen. A "diesel" sound may also appear when the engine is running

To replace the anti-freeze at Caliber, the first case is to disconnect the thick tube of the cooling system located underneath the battery. To do this, you will have to remove the battery and its site. Next, you need to uncork the heat sink

Owners of VAZ vehicles often encounter situations in which the valve replacement needs to be replaced

The part set for the replacement of the drive belt on the Dodge Caliber for motor vehicles 1.8 and 2.0 liters is no different. The order number for the original belt-04891598AB, the production belt of Gates is 6PK2550

The original oil filter: Chrysler 68001297AA or VAG 070 115 562Atataxes: MANN HU719/7XBOSCH 1457429192FLTRON OE 650 /1KNECHT OX188DHeight-140.5 mm. Diameter is 70.5mm. The inside diameter of the bottom is 33.3 mm. The inside diameter of the top is 15.2mm. VW 504.00/507

The shutter caps (or valves) are required to allow only the necessary oil necessary for the lubricant of the valve to be allowed. The shale caps are made of rubber, so over time they wear out like any other rubber details

Original Starter Order Numbers-05034555AA, 5034555AA

The Caliber throttle can be cleaned without being dismantled by taking action in the following sequence: 1. Start the engine, warm it up to the operating temperature, and shut it down. Unmount the accumult3

Starting with the model 2108, VAZ vehicles have started to be equipped with a GREM transmission. This means that the GRM Shadow needs to be regularly changed in accordance with the regulations