Engine

If the refrigeration fan in the Mercedes E-Class (W211) operates continuously, it means that one of the contacts will be permanently closed. The source of the problem can be either a sensor or a fan control unit or a wiring ring

The discharge and inspection of the exhaust manifold shall be carried out in the following sequence: (1) The exhaust manifold shall be removed. 2)

The intake manifold shall be removed as follows: (1) Disconnecting the ventilation ducts of the crankcase ventilation system 2) Disconnect the cable of the pedal gas 3) Disconnect the cooling system from the throttle nozzle

The common cause of the problem is the damage to the interculler tube. Another common cause of the failure is the violation of the work of the DHBs due to the poor quality of fuel

The Santa Fe engine of 2.7 litres is equipped with an automatic tenor of the auxiliary units. To install the belt on this motor, you need: 1) Loosen the tightening bolts

To replace the coolant sensor on Santa Fe, it is necessary: 1) to remove the antifreeze up to the level of sensor 2) Disconnect the battery and wire mesh (3) Dathchik.3) Unlock the new sensor.

According to the regulation of oil in petrol engine Mercedes E-class W211 needs to be changed once a year or every 15,000 km. However, the external drivers of the vehicle should also be taken into account. As for the candlelight, the producer states that the candles need to be changed once in 100,000 \   km

Replacement of the pomp at Santa Fe with the engines of 2.0 and 2.4 litres shall be done as follows: (1) Cooling cooling liquid) 2) Disconnect from the coolant pump 3) Remove the generator belt and pulley (4)) Remove the lid and the GRM-belt tensioner

According to the manufacturer's recommendations, the second generation of Santa Fe needs to be corrected: 1) Models with petrol motors. As a fuel for Santa Fe running after 2010, unleaded petrol has been used with octane number not less than 95

The Mercedes E200 W211 fuel system and some other modifications of E-class do not have a fine filter. The manufacturer restricted the range of cleaning elements to the rough cleaning filter