Engine

Arrival of Mitsubishi ASX air filter

Arrival of Mitsubishi ASX air filter
To remove the air filter, remove the two metal clips on the enclosure, unlock the halves and get the filter. The filter is located on the right side of the filter. The assembly needs to notice that the halves of the shell are caught correctly

Installing a security grid on the grille of the Mitsubishi ASX heat sink

Installing a security grid on the grille of the Mitsubishi ASX heat sink
The non-folding grill cells Mitsubishi ASX is large enough, so the radiator can be damaged by stones flying from under wheels. To solve the problem, you need to install an additional protective net behind the radiator grate

Carter protection setup at Mitsubishi ASX

Carter protection setup at Mitsubishi ASX
On Mitsubishi ASX, we can put the engine crankcase protection from the 10th generation Mitsubishi Lancer with minimal alterations. The rear of the anchorage fits perfectly, and the front right side will have to cut the bolting part of the protection that prevents the installation

Engine turns on gearshift for Mitsubishi ASX

Engine turns on gearshift for Mitsubishi ASX
The increase in engine speeds during gear shifting is the normal engine of the Mitsubishi ASX engine

Mitsubishi Lancer X

Mitsubishi Lancer X
To cleanse the fuel filter, you need a radiator cleaner (select one that is not aggressive to plastic), a penknife, a keyset with heads, and keyholes, and a Phillips screwdriver

Which gasoline to Mitsubishi Lancer X?

Which gasoline to Mitsubishi Lancer X?
The sellers recommend that the Lancer X tanks with an engine of 1.5 litres of octane number are not lower than 95 litres. The two-litre engine is able to consume both 92nd and 95 petrol. Fuel consumption with 95 petrol will be slightly lower

Which gas to fill in Mitsubishi Lancer 9?

Which gas to fill in Mitsubishi Lancer 9?
The Ninth Lancerer's Operations Manual prescribes the gas to be filled with octane number 95 and above regardless of the engine capacity

The Mitsubishi Lancer X is using a chaining or a GMS drive?

The Mitsubishi Lancer X is using a chaining or a GMS drive?
All the bundled Mitsubishi Lancer 10, which are supplied to the Russian market (1.5, 1.8 and 2.0 liters), have a chain drive set up by GRM. This is one of the peculiarities of Mitsubishi: on all the engines of the MIVEC series a chain of RMW is worth a chain

Should the Mitsubishi Lancer be warming up?

Should the Mitsubishi Lancer be warming up?
Unlike many other manufacturers, Mitsubihi gives clear instructions for warming up the engine. These instructions are in the user's guide. It is recommended to warm up the engine until the temperature of the coolant temperature is moved

idle engine speed Mitsubishi Lancer X

idle engine speed Mitsubishi Lancer X
This is often not a malfunction, as modern engines are prone to some instability of idle speed. Turbots can "swim" when additional load-producing equipment is included, e.g. lights, glass heating, or air conditioning