Engine

Mercedes S class (W221) with motors 272 and 273 (2005-2009) of the exhaust was installed a intake manifold with sliding crowns. They are used to dose the amount of air flowing into the cylinders. After 60 ,000-100, 000

The Mercedes S (W221) engines are highly reliable and durable. At the same time, they are characterized by some typical problems: burn intake manifold in petrol aggregates (torastout models). After 2009, this problem has been resolved

Procedure for the removal of the air filter body for the Mercedes S-Class (W221): Remove the front cover of the engine 1.Remove the intake air ducts 2 in front of the air filter

The centrifuge on the S-Class (W221) changes in this sequence: Turn off the ignition. Remove the air filter (1)

The malfunction of the mass air flow sensor on the Mercedes S-class (W221) is shown by problems with idle speed, reduced car dynamics, and the appearance of Check Engine indication

To replace the sampling device with the Mercedes S-Class (W221), perform these steps: Remove the air filter body. Opening the tube (1) from the mounting bracket (2)

Remove the front cover of the HBCD on the Mercedes S-Class (W221) in this sequence: Remove the engine protection.

All Mitsubishi ASX engines (MIVEC series) have a chain wheel drive. It works a little more smarter than the leather, but it does not require replacement and has much more than a belt, a safety margin

According to official data, in the city, cars consume 8 (engine 1.6), 9.8 (engine 1.8) and 10.5 (engine 2.0) litres per 100 km petrol, and on road 5, 6.4 and 6.8 respectively

To replace the candles, you will need a key of 10 and a candle key on 16 with a rubber band. The rubber is needed to fixate the candle when it is curved, and to protect the candlelight isolator from the impact with a metal key