The causes of the failure of the starter on Skoda Yeti: If the starter motor does not work when the starter motor is turned on, the starter may be out of order or the traction relay does not work, and the malfunction may be in the transaction. In order to determine the cause of the malfunction, check the voltage at the "50" traction relay. The ignition from the starter position continues to work, perhaps the contact with the traction relay, or the ignition lock does not blur the starter chain. In this case, it is recommended to turn off the ignition and disable the ASB and then correct the problem.
- If the starter motor does not work when the starter motor is turned on, the starter may be out of order or the traction relay does not work, and the malfunction may be in the transaction. To determine the cause of the malfunction, check the voltage at the "terminals" of the traction relay.
- If there is no voltage attached to the starter power, the electrical circuit is damaged, there is an incorrivated tractive relay or starter.
- If the starter rotates slowly and does not start the engine, the Amb, the graphite brush is poorly adjacent to the collector of the starter motor, the oil in the engine grease, the working surface of the collector in poor condition, or the bearings of the starter bearings.
- If, when the ignition switch is released from the "starting engine" position, the starter continues to work, probably contact with the traction relay or the ignition lock does not blur the starter chain. In this case, it is recommended to turn off the ignition and disable the ASB and then correct the problem.
