Steering & Suspension

In the navigation part of Lifan Smiley, the most weak points are: Steering arrowheads-may require replacement after 10 thousand pieces. The front and back hub bearings-the resource of the parts-is about 50-70,000 people. At the front suspension pens-after 60-70 thousand

Weak front-loaded springs on Lifan Smiley are one of the main reasons for the car's progressive shreds. Over time, the car can be reduced to 100 \   mm, and it will be impossible to exploit it properly on Russian roads

Repairing the front end of Lifan Smiley in this sequence: Lift the front of the car and secure the front of the vehicle. Remove the wheels and the bolts of the levers and stabilise the levers of the levers.

Removing the front shock absorbers on Lifan Smiley may be necessary if they are to be replaced or replaced if they need to be replaced. You will need 10, 13, 15, and 18 keys to remove the rack cabinet. The procedure is as follows:

To remove the rear shock absorbers on Lifan Smiley, do the following: Raise the rear of the car, lift the rear of the car and secure it. Remove the wheel and drive the wiring harness on the shock absorber

Lifan Smiley has a multifancier rear suspension. We take off the transverse levers in this order: Put the car on the handbrake, lift the rear part and remove the wheel.

The following normative values should guide the alignment of the breakaway-Lifan Smiley with the following normative values: from -40 ` to 10 20 ` (norm 00 20 `). Corner of the longitudinal slopes of the kingpin: from 10 55 ` to 30 55 ` (norm 20 55 `)

If the rear backbearing Lifan Smiley has been overstretched or overstretched, even after a short run, he may have a stout and demand replacement. In order to replace the details, we need to do the following: Rise and lift the wheel

The Lifan Solano suspension is not very reliable. Usually 20 to 25 thousand. The creaks are beginning to appear, especially in the winter. Also in frosty weather can be found the knocks that can be removed from the lift

To remove the front cushioning frame on Lifan Solano, the keys are required on 13, 17, 18, 21, and BRAX T7. The order of the withdrawal is: Put the car on the handbrake, and, in case of it, put on the rear wheels. We lift the car and take the wheel off