Steering & Suspension

Lexus RX II: replace or repair?

Lexus RX II: replace or repair?
If the Lexus RX II has become unsuitable, they should be replaced, but if they are not available, they can be repaired by doing the following:

Installation of GAR from Chevrolet Niva to Great Wall Hover

Installation of GAR from Chevrolet Niva to Great Wall Hover
Spare parts, which rarely fail, are expensive and not always available. Sample of hydro-amplifier on Hanover

Problems with the Honda Accord VII suspension

Problems with the Honda Accord VII suspension
The sign on Honda Accord 7 has a multiburning structure that provides good manageability and comfort. The weakest points in the area are:-Stabilizer-requires replacement in between 30 and 50 thousand. km

Reason for Lexus RX II's front suspension

Reason for Lexus RX II's front suspension
Sometimes the sound in the front suspension of the Lexus RX does not indicate a serious failure. Bad roads, heavy motor and vibration cause the waning and loosing of the bolts of the front suspension

Problems with the helmsman by Honda Accord VII

Problems with the helmsman by Honda Accord VII
Problems with the helmsman gear on the Honda Accord 7 are most often manifested in two symptoms:-Thick of the gear rack (most common problem).

Adjusting the rail of the steering gear to the Honda Accord VIII

Adjusting the rail of the steering gear to the Honda Accord VIII
The alignment of the gear rack to the Honda Actuation 8 is as follows: 1) Put the wheels in the straight line. 2) Open the bonnet and relax the counter-nut screw of the rail of the rail.

The steering is spinning with ropes and variable efforts on the Lexus RX II

The steering is spinning with ropes and variable efforts on the Lexus RX II
Many owners face an uneven force at the helm of the Lexus RX II when it rotates, and the amplifier does not issue any extraneous sounds. The fault of the whole goddaughter depicted in the photograph

Replacing the front shock absorbers at Honda Accord VII

Replacing the front shock absorbers at Honda Accord VII
The procedure for replacing the front shock absorbers on [ [ Axord 7]] is as follows: 1) Open the hood and disrupt the five circular top-leg nuts (central nut not to move) .2) Remove nuts by leaving a pair of buffers to support the shock absorber

Lexus RX II pneumoopsuspension

Lexus RX II pneumoopsuspension
In Russia, all RX II in the R2 and R3 levels were equipped with a pneumatic-pendant. The brake step in the Lexus RX II pneumonia may indicate a defect in the Bonus Depreciation, but not always

Always out of the transverse stability lever on the Lifan Smily

Always out of the transverse stability lever on the Lifan Smily
Many Lifan Smiley has a problem with the poor stowaway of the transverse stability lever, which is why it constantly climates out of the box