Steering & Suspension

Frequently, the owners of the VAZ-2104/05/07 shall encounter the rocking of the rear of the body in a transverse direction at a low speed. The most noticeable development during the dispersal of the 1-2 transfer after the removal of the obstacle, for example, a lace policeman

A lot of Jill MK, even at a low mileage, has a clatering sound in the rear suspension. Usually, it is distributed from both sides of the car with small roughness. The most common reason for the knock is the destruction of the rubber cushions of the shock absorber

Many owners of Jill MK complain about the violins in the front of the car. The problem is encountered in both new cars and mileage cars. The most common causes of the creaking are: Loosen bolts of the levers of the lever

SilentBlock is an important piece of suspension, which provides the mobility of elements relative to each other, and also removes metal parts from friction. If the site is incapacitating or incapacitating, it must be changed

The ball support of the front suspension on the Geely MK is changed with the lever in the assembly. At the same time, many car dealervers can press a ball support and install a new welding

When the tipping points appear in the front suspension, the Geely MK can be used to repair the stabilizer racks. To do this, we need to pick up the racks. Original Chinese or similar Japanese Toyot Jiris are sold only in a kit with a kit

SilentBlock is an element of a suspension which needs to be regularly tested and replaced when necessary. If extraneous sounds or a car became less controllable while moving from the front suspension, then it is time for the site blocks to change

The original locentblocks of Jill MK's front levers have the following numbers: MK1No24 1014001607-rear arm unit (vertical) MK1No25 1014001608-Front saloon lever (horizontal) You can also select analogues from other manufacturers

Replace the stabilizer foot on the Gil MK with the following: Take the key to 10, and then hold the key to the 13 top of the rack. Take off the nut, the puck, and the bushing.

The structure of the front steps of VAZ vehicles of different families (2108, 2109, 21099, 2110, 2111, 2112, 2113, 2114 and 2115) is the same, so the bearing of the front step changes one principle