Steering & Suspension

Replacing the front hinge (side) of the rear suspension beam on Citroen C4

Replacing the front hinge (side) of the rear suspension beam on Citroen C4
To remove the front hinge of the rear suspension plate of the Citroen C4 car, you need to remove the rear suspension beam from the car.

Replacement of the front hub bearings at the Citroen C4

Replacement of the front hub bearings at the Citroen C4
To replace the bearing of the front row of the Citroen C4 vehicle, it is necessary to lock the car with the handbrake and on the jack to remove the front wheel.

Is it true that in Lada Kälin, the EID can get a lock on the movement?

Is it true that in Lada Kälin, the EID can get a lock on the movement?
The design of the ECU does not imply a mechanical lock on the LADA Kalina steering column in the event of disconnection. However, when an alarm system is installed on a motor vehicle, the rudder may be blocked by a regular anti-theft mechanism

Replacement of the ball support bracket with the Citroen C4

Replacement of the ball support bracket with the Citroen C4
To remove the swivel pin and remove the protective sheet and lift the tulking ball (FACOM NK41 L). To lift the new ball-pin of the turning arm. Tighter the ball support at 230 Nm.

Replacing the rear shock absorbers at the Citroen C4

Replacing the rear shock absorbers at the Citroen C4
Citroen C4 is a rather rigid rear suspension, which is a problem in its operation on Russian roads. The solution to the problem is to replace the factory absorbers and springs with more "soft"-long

Stuk at LADA Kalina column

Stuk at LADA Kalina column
One possible cause of the knock in the area of the LADA Kalina column is the cover of the steering column: over time, the mounting screws are loosed from shaking and need to be pulled

Replacement of liquid at the EGUR at the Citroen C4

Replacement of liquid at the EGUR at the Citroen C4
In order to replace the liquid in the electro-hydraulic drive, the rudder (hereafter referred to as the EGUR) is to install Citroen C4 on the lift. Disconnect the reverse hose and reconnect the hoses.

How do I remove the front end lever on Daewoo Matiz 2?

How do I remove the front end lever on Daewoo Matiz 2?
The work will require a lift or an overpass (one wheel will have to be hung). The first thing to do is to remove the wheel. Next, it is necessary to unscrew the bolts of the ball support bracket to the swivel-deck

rake's rake on Ladle Kalin.

rake's rake on Ladle Kalin.
One of the weak points of the helmsman's Kalina Kalina is the so-called "plate spring"-already under small mileage it is compressed and does not restore the original form

Adjustment of steering control without hydro-amplifier on Daewoo Matiz

Adjustment of steering control without hydro-amplifier on Daewoo Matiz
First of all, it is necessary to set the steering wheel to the neutral position, the wheels must look straight at the motion