- Details
-
June 02, 2023
-
Written by Jason Hance
Procedure to replace the stop lamp switch on the A4 Generation 3: Detach the tie breaker, first push back one anchorage, then take off the second.
- Details
-
June 01, 2023
-
Written by Jason Hance
There are several outdoor lighting functions for the 3rd generation A6 generation. To do this, click the CAR button to enter the MMI system. Select Systeme and go beyond the AufJenbeechtung menu. Enable or disable lighting
- Details
-
June 01, 2023
-
Written by Jason Hance
To set the compass in the Santa Fe side mirror, you must do the following:-Press and hold the button for more than 9 seconds. This will clear the compass memory, and the "C" character appears on the display.
- Details
-
May 31, 2023
-
Written by Jason Hance
Fuses in the A6 Generation 3: Black Block
- Details
-
May 31, 2023
-
Written by Jason Hance
To access the 3rd generation A6 hidden menu, you need to connect to a VAG COM car and access the 07 MMI block. Then open the adaptation, enter channel 08, and change its value from 0 to 1. Save Changes, Disable Diagnostics, Reload the Head Device
- Details
-
May 30, 2023
-
Written by Jason Hance
The cruise control on Santa Fe operates at a speed of over 40 km/h. To enable it, press the ON-OFF button at the top right of the rudder. A cruise control indicator must fire on the panel.
- Details
-
May 30, 2023
-
Written by Jason Hance
You can display the battery technical condition on the A6 3rd generation of the MMI system. To do this: Click on the CAR.Select menu item Systeme.Pick Batteriezzand.Your display shows the status of the battery
- Details
-
May 29, 2023
-
Written by Jason Hance
LCM system (Licht Control Modul) at first generation BMW is designed to improve traffic safety in the event of a burnout of a lamp in one of the taillights
- Details
-
May 29, 2023
-
Written by Jason Hance
In order to protect the headlamps on Santa Fe, the following fuses are used:-Passing beam headlamps passing lamps H/LP LO LH, 15A.-Passing beam headlamps passing lamps H/LP LO RH, 15A.-Driving beam H/LP HI, 20A
- Details
-
May 29, 2023
-
Written by Jason Hance
In order to take advantage of the hidden menu of the first generation BMW, we do the following. Check to see if the menu is activated. To do this, press and hold the diem reset button until Test Nr. 01 is displayed.