Engine

If the engine produces a ringing metal clack, it is likely to detonate

If the engine is unstable at idle speed, it is necessary to check the operation of the throttle conditions, absolute pressure and air temperature in the manifold

To "fire" the battery, the main-beam headlamps must be turned on before starting the engine for 5 to 10 seconds. Start motor only with clutch disengaged

Frequently, the problems with movement ropes are related to the air filter or catalyst. This problem is particularly prevalent when the vehicle is fuelled with fuelwood and is operated under conditions of severe dust

To replace the oil, you must first clear the cork with a metal brush and a rag. Then it is necessary to turn the cork away, prepining the capacity of at least 5 litres for the oil drain

The most frequent complaints from the owners of Logan are related to the low thrust of 1.4 engine. There are also some technical problems. For example, in winter, the turnover is often "stickup", that is, after the release of the pedal, they keep on keeping at the level of 2-3 thousand cubic meters. rpm

The vibration of the engine may be associated with several causes. For example, there may be irregular compression in cylinders due to valve wear, saddle or piston rings. Another reason may be incorrect adjustment in the valve actuator.

The fuel level lamp shall be lit on Reno Logan with a balance of 5 litres of petrol in the tank. Thus, when driving a normal driving style in a mixed cycle with a burning lamp, it is possible to go about another 50 \   km

The fuel consumption of Reno Logan depends on the volume of the engine, the operating conditions, the type and quality of the fuel, and the technical condition of the vehicle

To determine the level of oil by the onboard computer, it is necessary to wait until the engine starts until it displays Oil Ok and then press any of the buttons on the display