- Details
-
February 12, 2022
-
Written by Jason Hance
Engine capacity added to the Octavia engine depends on engine type .1.4 55kW-3.5 l; 1.6 55kW-3.5 l; 1.6 74kW-4.7 l; 1.8 92kW-4.5 l; 1.8 132kW-4.5 l; 1.9 ,966kW-4.5 l; 1.9 81kW-4.5 l
- Details
-
February 12, 2022
-
Written by Jason Hance
This motor was the starting line of Octavia's engines. The engine's power is sufficient for calmness around the city, but the engine is so characteristic that the maximum power is reached after 3500 rev/min
- Details
-
February 11, 2022
-
Written by Jason Hance
Frequently, the owners of Octavia, with a 1.8 l turbothengine. notice that the engine doesn't work stably at idle speed. Main cause-design features of the engine
- Details
-
February 11, 2022
-
Written by Jason Hance
If the engine speeds up and the engine speed is started, the throttle shall most likely need to be cleaned. This can be done by a special tool for stripping the carburetor or cleaning the carburetor
- Details
-
February 10, 2022
-
Written by Jason Hance
With proper operation and timely quality of service, the turbo engine can reach 400,000 km of mileage. The turbine also serves a long time as it is not too laden (if operated at standard pressure)
- Details
-
February 10, 2022
-
Written by Jason Hance
If immediately after the start of the engine, the roaring sound is likely to be heard in the bearings of the starter
- Details
-
February 09, 2022
-
Written by Jason Hance
During the discharge of water, it is necessary to pay attention that diesel fuel does not fall on the hoses of the cooling system. If the fuel is hoses, it must be removed immediately
- Details
-
February 09, 2022
-
Written by Jason Hance
To increase the rate of cooling of the air, we need to improve the intercooler. To do this, you need to make a break in front of the interculler. The first thing to do is dismantle the wheel and cover.
- Details
-
February 08, 2022
-
Written by Jason Hance
To replace the oil filter on Octavia A4, it is necessary to filter the oil filter and remove the oil seal near the engine.
- Details
-
February 08, 2022
-
Written by Jason Hance
The first thing to do is remove the four rack-mounting bolts and remove the clamp that attach the cooling system. Next, remove both the headlamps, twist the four screws at the top of the heat sink, and pull out the heat sink with the condenser.