Electrical equipment

Why the KIA Cerato II's passing lamps quickly

Why the KIA Cerato II's passing lamps quickly
The rapid overfire of the lamps is a second generation Kia Cerato problem. The same fast and fast light turns on different capacities and from different manufacturers. The reasons are unknown. The only way to solve the problem is to install the xenon bundle

Remove the front headlight onto the Dodge Caliber

Remove the front headlight onto the Dodge Caliber
Officially, the front headlight of the Caliber is a non-latrine, and the headlamp glass is non-replaceable. However, many remove glass and change it. To do this, we need to heat an industrial hairdryer at the glass and the main body of the headlamp so that the sealant that is glued to the glass becomes soft

Types of lamps for Dodge Caliber

Types of lamps for Dodge Caliber
The following lamps are installed in the salon: the Front and the Central Lamp Lamps of the T578. Such lamps are easy to find, but they can be replaced with C5W or C10W, they are a little shorter, but they are also suitable.Lamp with marking 8-A35LF is used in the luggage compartment

Does the KIA Cerato II also highlight the cigarette lighter and the window-lift button?

Does the KIA Cerato II also highlight the cigarette lighter and the window-lift button?
The cigarette lighters are not available in all configurations of Kia Cerato 2. All of the buttons of the window-lift devices were installed only on the 2010 model year, and in 2009 only one button was highlighted

Mortgage rear lamps on the Dodge Caliber

Mortgage rear lamps on the Dodge Caliber
On all of them, without exception, the Caliber will be more or less conjecture on the back lamps. This is particularly good in transparent areas. The cause of the conjecture is the infirm light of the reversing lamp holder

What is GEM module on Ford Focus 1?

What is GEM module on Ford Focus 1?
On the Ford Focus 1 the comfort functions are managed by a separate unit called GEM module or comfort module

When headlights are activated on KIA Cerato II, the luminance of the devices and buttons decreases

When headlights are activated on KIA Cerato II, the luminance of the devices and buttons decreases
The lower luminance of the illumination of the passing beam shall be used to provide greater safety while driving at night. In this way, the manufacturer decided to "secure" the driver from the dazzle with enough bright illumination in the Kia Cerato cabin

Dismantling in a Ford Focus 3 with a 2.0 engine

Dismantling in a Ford Focus 3 with a 2.0 engine
In contrast to the 1.6 l., the removal of the third generation of the battery pack will require the removal of the air filter. To remove the filter, remove the rubber retainer from two tubes and a metal clamp from the pipe leading to the filter

Dismantling of the rear lamps on the Ford Focus 1

Dismantling of the rear lamps on the Ford Focus 1
It is very easy to remove the back lamps on the first generation Focus. To do this, you have to open the luggage door and find two smores on the right side of the left lantern and left of the right

Installation of the LED blocks in the rear lamps KIA Cerato II

Installation of the LED blocks in the rear lamps KIA Cerato II
The back of Kia Cerato 2 has regular lamps installed, but it can be replaced by LED blocks, keeping the external flashlight on the lantern. This requires the acquisition of LED blocks for Kia Cerato 2/Forte. Such units produce, for example, the Korean company XLook