Brake system

The first step is to drain the brake fluid. Disconnect the brake fluid level sensor connector. Disconnect the brake line and tube from the main brake cylinder. It is also necessary to disconnect the hose from the brake fluid

To disconnect the vacuum hose from the brake-side amplifier, press the vacuum hoses on the connectors to connect the vacuum hose to the intake manifold. They need to be removed with a pair of pliers

The first thing to do is to remove the battery and its site. After that, remove the main brake cylinder and disconnect the brake line and vacuum hoses

To replace the brake pads on the first generation Mazda 6, it is necessary: 1.      Remove the car from the right side. 2.      To remove the wheel. 3. Attach a nut that attaches the brake hose to the cushioning rack

The front brake pads for engines 1.8 are different from those installed on engines 2.0 and 2.3. In the case of the 1.8 engine, the brake pads are the same as those on engines 2.0 and 2.3.

In order to replace the brake pads on Mazda 6, the second generation will require a key of 14 and a flat-blade screwdriver

If parking brake adjustment required ("skier") Mercedes Benz Class (W204), do the following: Release the parking brake

If a metal knock is heard in the rear wheel of the Mercedes Benz Class (W204), the problem is likely to be related to the parking brake plate. To remove the knock, you can do the following: Raise the car and remove the wheel. Take the parking brake drum

In the case of the 10th generation of the 10-generation Mitsuici Lander, owners often complain about the hissing sound that is heard when the brake pedal is pressed. In fact, the hiss of the brake pedal is not a malfunction for the Mitsubishi Lancer X

The ninth generation Lancer will require a key of 10 and a facial screwdriver to adjust the handbrake. It is necessary to lift the handbrake handle to the highest possible position. If 5-8 clicks of the temple mechanism are heard, the manual brake does not need adjustment