Often, after a set of wheels is replaced from winter to summer (or vice versa), the wheel starts to drive, although there was no such wheel during the last year. Before you go to a schnomontage and ask to rebalance the wheels, you can carry out a simple diagnostic procedure that can help you identify the cause.
1. Check the pressure in all tyres.
2. Replay the wheels. Back up front, front, back.
3. If, after the first two procedures, the improvement is not stepped up, it is possible to test the tyre geometry independently. To do this, each wheel is to be placed in line with the lift, and a fixed level object, such as a wooden bar, should be placed in parallel to the wheel. The wheel and the edges of the stationary object can be reasonably determined as to whether there is a violation of the geometry of the tyre. It is necessary to watch in parallel to the movement of the car and to the side, as the violation of the geometry can happen in two planes. If all four wheels are smooth, you can go to the tire shop and balance. By the way, the tire worker is checking the bus rotating on the axis of the balancing machine in the same way.
