Brake system

The brake pports are the children's disease of Chevrolet Aveo. The fact is that over time the sub-ports are worn out-there is a play of the road and the passage of unevenness, tramway tracks, etc. they start knocking. There are special brackets for the dryport

With emergency braking at Hyundai Solaris equipped with an anti-lock system, the stop lamps are starting to blink rhythmically to attract the attention of the driver behind the driver. The blink of the stop lamps is not duplicated in the salon, i.e. there is no special indicator

You can use special lubricant to get rid of the extraneous sound of the seaports. But this is not an ideal way, but the procedure has to be repeated at some time. You can also solve the problem by installing special locking brackets

For a simple adjustment of the handbrake on the Chevrolet of Captiva, it is enough to disassemble the armrest, twirling 4 lines, and spin the adjustment nut. For more correct alignment, perform the following actions: 1) Lift up the auto-lift 2) Wheel rear wheels

Particular attention shall be paid to the rail guides for other parts of the braking system, following the number of lubrication lubrication with a change of brake pads. In addition, Hyundai Soanata NF is required to periodically use the parking brake

The need to change the rail guides on the Chevy Captiva can tell you the uneven wear and tear of the internal and external brake pads that are caused by the coupling of the rails

To replace the rear brake pads on the Chevrolet Cappativa, perform the following: 1) Slumbering) and 2) The lower substud screw with the key "by 14" and the upper slackdown

Sometimes, the wear indicator continues to work in Hyundai Tucson after the pad has been replaced. This may be related to the curing of one of the sub-ports or the excessive tension of one of the parking brake cables

The removal of air from the Chevrolet Cobalt hydraulic system must be performed in this sequence: Right rear wheel; Left front wheel; Left rear wheel; Right front wheel

The replacement of the front brake shoe on the Chevrolet Cobalt must be performed in this sequence: (1) Check the brake fluid level. If it is located next to the max label, pump a little more liquid, 2) Remove the front wheel and secure the car