Engine

Details

Written by: Jason Hance

Also available:

Created: 28 January 2023

To disassemble the fuel pump on the Ford Mondeo III, it is necessary to disconnect ACBA. Then empty the fuel tank and dismount it. Remove supply and discharge pipes as well as the connecting wire. Free the fastening ring with the tool "ford 23055"

Details

Written by: Jason Hance

Also available:

Created: 28 January 2023

The first thing you need to do is cut off the battery. And then we need to remove the top clamp of the engine. The next step is to remove the power from the generator belt

Details

Written by: Jason Hance

Also available:

Created: 28 January 2023

Pollution of the throttle is shown by Lifan Smiley with symptoms such as high idling speed and increased fuel consumption

Details

Written by: Jason Hance

Also available:

Created: 27 January 2023

To dismantle the hoses and hoses on the Ford Mondeo III, you need to disconnect fast couplings or screw-connected couplings. If you have the fastenings, you can use a thin screwdriver and weaken them. Disconnect the hose movements

Details

Written by: Jason Hance

Also available:

Created: 27 January 2023

The Ford Mondeo 4 generation car to the Russian market was offered with the following powertrains: petrol engines with a volume of 1.6 (125 hp), 2.0 (145 and 203 hp), 2.3 (161 hp) and 2.5 (220 hp), 2.0 litre diesel and 140 hp.

Details

Written by: Jason Hance

Also available:

Created: 27 January 2023

A common problem with Liffan Smiley is a coolant leak. To eliminate it, you need to pull the chomuts on the chilling system. The second main cause of the leak is the broken valve in the heat sink

Details

Written by: Jason Hance

Also available:

Created: 26 January 2023

On Mondeo 4 you can install 4-generation gas coil equipment. A 40-60 litre gas cylinder is placed in a niche for a spare wheel

Details

Written by: Jason Hance

Also available:

Created: 26 January 2023

To clear and replace the air filter on the Ford Mondeo III with an engine 1.8 to 2.0 l, remove the filter cover and remove the filter element. When replacing the filter element, clean the filter body with the cover with a cloth or compressed air

Details

Written by: Jason Hance

Also available:

Created: 26 January 2023

Replacement of the antifreeze on Lifan Smiley in this sequence: Remove the heat sink.

Details

Written by: Jason Hance

Also available:

Created: 25 January 2023

Turbodisel is not a bad drive in Mondeo, but in cars with a manual gearbox, it is often necessary to turn on a lower gear for a dynamic dispersal. Wine to the Turboyum