Engine

Details

Written by: Jason Hance

Also available:

Created: 22 January 2023

Lifan Smiley's air filter, according to the manufacturer's recommendations, needs to be changed in 20,000. km travelled. In the Russian cities, this interval is better reduced to 10-15,000 people. km

Details

Written by: Jason Hance

Also available:

Created: 21 January 2023

In the diesel injection system on the Ford Mondeo III, all pressure pipes and discharge piping shall be checked for leaks. Then check the density of the cover of the pump valve cover

Details

Written by: Jason Hance

Also available:

Created: 21 January 2023

For checking the work of the filament light on the Ford Mondeo III, it is necessary to disconnect the CCM, wire connections and extract the candle of the filament. Place candles on a solid base

Details

Written by: Jason Hance

Also available:

Created: 21 January 2023

If the smell of petrol comes in the Lifan Smiley Salon, you should check all possible sites for depressurization of the fuel system. The odor removal procedure may include: Replacement of the petrol tank in another (e.g. VAZ 2108/09)

Details

Written by: Jason Hance

Also available:

Created: 20 January 2023

To test the current in the ignition system on the Ford Mondeo III: Disconnect any tequer and return the spark plug. At the start of the candle, the candle must not slide

Details

Written by: Jason Hance

Also available:

Created: 20 January 2023

To check the level of oil on the Ford Mondeo III is recommended on a cold engine before starting by placing the car on a horizontal surface. Eject the measuring probe and wipe it clean, dry cloth, and then paste it into the oil-crater

Details

Written by: Jason Hance

Also available:

Created: 20 January 2023

The need to clean the chain of the gas pump on Lifan solano indicates a drop in the power of the engine and the increased noise from the pump. To clear the grid, remove the fuel module located in the petrol tank

Details

Written by: Jason Hance

Also available:

Created: 19 January 2023

If there is a malfunction in the preheating system of the diesel Ford Mondeo III, first check the electrical fuse in the engine, in particular the safety of the on-board power supply

Details

Written by: Jason Hance

Also available:

Created: 19 January 2023

In order to check the ventilating of the tank on the Ford Mondeo III, heat the engine up to the operating temperature and leave it at idling speed. Disconnect the low pressure hose from the pressure relief valve

Details

Written by: Jason Hance

Also available:

Created: 19 January 2023

If the ignition coil on Lifan Solano tries to correct the position, fill the reel with epoxy polymer. Before performing this procedure, other components of the ignition system need to be checked: HV integrity