Engine

Details

Written by: Jason Hance

Also available:

Created: 26 June 2021

The engine cylinder fuels a fuel mixture with a temperature of 14-15 times greater than fuel. If the air intake system was not equipped with an air filter, for example in the desert, the combustion chamber would have had sand in one day

Details

Written by: Jason Hance

Also available:

Created: 25 June 2021

Despite the difficulties associated with the physical properties of diesel fuel, the engines invented by Rudolf Diesel are rapidly winning the market for passenger cars

Details

Written by: Jason Hance

Also available:

Created: 25 June 2021

The device in which the high pressure fuel pump is combined with the nozzle, is called a power supply with pump-injector

Details

Written by: Jason Hance

Also available:

Created: 24 June 2021

The gas-distribution mechanism inlet valve shall open the cylinder fuel to the cylinder and stop access before the start of the compression cycle. In the case of a diesel engine, the valve is able to transmit only air to the combustion chamber

Details

Written by: Jason Hance

Also available:

Created: 24 June 2021

The intake manifold is the most important part of the internal combustion engine intake system. In the intake manifold, the air stream is mixed with petrol, forming a fuel-air mixture, and distributed in cylinders

Details

Written by: Jason Hance

Also available:

Created: 23 June 2021

The starter retractor performs two basic functions. At the start of the engine, the engine is connected to the shaft of the wheel of the flywheel, and when the engine is started, it returns to its original position

Details

Written by: Jason Hance

Also available:

Created: 23 June 2021

A complex exhaust system, consisting of many elements, is simply a "silencer". Nevertheless, understanding people know that by working on it, it is possible not only to change the sound of the engine, but also to add some horsepower

Details

Written by: Jason Hance

Also available:

Created: 22 June 2021

The discharge valve is part of the internal combustion engine. Ensures that the exhaust gases are released from the combustion chamber.Combustion chamber shall be leakproof when the fuel is flashed

Details

Written by: Jason Hance

Also available:

Created: 22 June 2021

The exhaust manifold is a massive metallic collection for hot gases which are removed from the engine cylinder after the useful work has been done

Details

Written by: Jason Hance

Also available:

Created: 21 June 2021

The walking cold is an important mode in the operation of any engine. Normal idling speed of each motor vehicle (can be obtained from the instructions for the operation of the car), the average normal idle speed of the hot engine is between 650 and 1000 rpm.